MGP10 Structural Timber 70×45
Price range: $3.85 through $23.10 + GST
MGP10 Structural Timber 70×45 is structural pine suited to a range of framing work. Its 70×45 mm profile may be specified for internal walls, partitions, noggings, and other building applications that require this size and MGP10 grade.
Specifications
- Grading Method: Machine Graded
- Australian Standards
- Fast Delivery
- Full Documentation
MGP10 Structural Timber is manufactured using machine grading technology to provide consistent structural performance throughout each length.
- MGP10 70×45 is a machine-graded structural pine used across a range of timber framing projects.
- MGP means Machine Graded Pine, a grading system used to classify structural pine according to its mechanical properties.
- The MGP10 grade has a rounded characteristic modulus of elasticity of 10,000 MPa.
- 70×45 mm identifies the cross-sectional dimensions of the timber.
- Depending on the project, this size may be specified for internal walls, partition frames, noggings and similar framing components.
- Whether 70×45 MGP10 is suitable for a particular part of a building depends on factors such as loading, span, spacing, and the project specification.
Applications
Depending on the building plans and structural requirements, MGP10 Structural Timber 70×45 may be used for:
- Internal wall frames
- Partition wall frames
- Studs where 70×45 MGP10 is specified
- Noggings and blocking
- Light framing components
- Residential building work
- Commercial building work
The timber grade, section size and treatment should match the requirements set out in the relevant plans and specifications.
| Length | 70×45 (5.4 LM), 70×45 (6 LM), 70×45 (1.0 LM), 70×45 (3.6 LM), 70×45 (4.8 LM) |
|---|---|
| Grading Method | Machine Graded |
Frequently Asked Questions
MGP means Machine Graded Pine. MGP10 is a structural grade with a rounded characteristic modulus of elasticity of 10,000 MPa.
It refers to the timber section dimensions of 70 mm by 45 mm.
It may be specified for internal walls, partition framing, noggings, studs and other framing components, depending on the project requirements.
The 70 mm width is narrower than the 90 mm section, making 70×45 suitable for lighter span applications. The 90×45 mm is the more common structural section for floor joists and load-bearing framing.
Yes — this MGP10 structural pine complies with Australian Standards.
No. MGP10 identifies the structural grade of the pine. Any preservative treatment applied to the timber is classified separately.






